How to Replace a UPVC Window Handle

Don't panic in the event that your upvc window handle is broken. Replacing a upvc window handle is a relatively simple task and can be completed in a matter of a few steps.

No matter if you have a cranked or in-line espagnolette type of window handle, they all feature a square spindle that extends from the back plate and is inserted into the locking mechanism.

Identify the type and size of the handle and lock.

Over time, window handles or locks can get damaged and lose functionality. The good news is that this issue can often be repaired without replacing the entire uPVC window unit. The first thing you need to do is determine the type and size of your handle and lock. This will allow you to determine the replacement window seals parts that you require.

Identifying the type of handle can be identified by looking at the handle's base. There will be a screw or pin holding the handle to its base. If the screw is not present, this can be an indication that the handle has broken off from its base. If the handle is split internally and does not hold the spindle any longer It could also be an indication that the handle must be replaced.

There are many different types of uPVC window handles The most well-known is the Espag handle. They are typically fixed using two bolts and the spindle works with the locking mechanism within the window frame. These handles are commonly used on tilt and turn uPVC windows.

Another type of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, however they have a lower projection from the frame. These handles are typically used on older uPVC windows.

Finally, there are also Venetian window handles that are similar to the Espag handle, but have flat bases that allow them to be fitted flush with the frame. They are a great option for homeowners who are looking glass for windows replacement an elegant, stylish handle that will blend in with their uPVC window frames. The handles are available in a variety of colours that will match any design.

Measure the spindle

It is important to know how the handle is fixed before you purchase a replacement. This will determine how it is tight or loose and if it will fit properly into the window frame. This can be done by identifying the handle's type and measuring the spindle. The spindle is a metal shaft that connects the handle to the lock in the window frame. It's available in different sizes with the current industry standard being 8mm. Older handles could have a 9mm cross-section so it's crucial to measure the old one to ensure you get the right size replacement.

There are many types of window handles. The most commonly used are the inline Espagnolette handles and Cockspur handles. These handles operate with a locking mechanism inside the window using shootbolt rods which secure the window when it is closed. Depending on the type of handle, they are held in place by screws or pins.

You can buy replacement upvc handles on the internet or at most DIY stores. They are available in a variety of finishes, and are suitable for windows that are new or replacement. They can also be key-locking or fire-escape non-locking for additional security.

To take off your old handle open the window and remove the screws which hold it in place. Be careful not to damage the screws and keep them safe in a container for future use. After the screws are removed, carefully remove the handle. Find the distance from the base of the spindle up to the end. This will give you the information necessary to purchase the right replacement. The spindle of the handle is the steel shaft connecting it to the lock gearbox in the window frame.

Remove the old handle

Changing the handle of a uPVC window handle is an easy task and usually takes no more than five minutes using the proper tools. The first thing to do is identify the type and size of the handle or lock. This will allow you to determine the best replacement. After that, weighing the spindle will make sure that the new handle is a suitable to the existing one. The handle that was used previously needs to be removed and replaced with the new one.

Most uPVC handles are inline Espagnolette handles, with a central spindle that slots into the locking mechanism of the window. These are generally easy to remove, but you may require force to remove them if they are stuck. The handle is usually secured by two screws which can be removed using the aid of a screwdriver. It is also possible to remove pins, based on the kind of handle.

After the screws have been removed Once the screws are removed, you can remove the handle that was previously attached. If the handle is unlocked, the top of the baseplate will be visible. It will reveal two more screws that can be unscrewed. If the sticker is in place, you'll need to take it off.

It is now possible to screw into the new handle using the screws from the previous handle. The screw holes should be aligned on the window with the holes in the handle. Once you've done this then you can replace the caps on the screws and then test the new handle to ensure that it is working correctly. The replacement of a uPVC window could be a quick and simple job, but it's important to take the time to do it correctly.

Install the new handle

If you've been able to successfully take the handle off the frame, it's time to install your new handle. Start by locating and removing the screw covers with your screwdriver. Once they are removed, put them in a safe location and proceed to the next step.

Then screw the spindle in by aligning it with the hole that is already in place. Be sure to align the holes in the handle with holes in the window frame. You should make use of a screw of the same length as the one used before, or it could cause the handle to not being secure.

uPVC Espag handles are equipped with a square 7mm spindle that rotates the lock mechanism that is fitted to the window. This kind of handle can be commonly found in modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) come with long noses that lock over the outer frame or transom bar cross member and are typically found in older windows made of uPVC.

It's important to lock and unlock the window numerous times after the handle is installed. If all goes according to plan, the replacement uPVC handle should be securely attached and working smoothly. If not, the steps listed above will help you diagnose any issues and resolve it quickly. If you're struggling with your uPVC handle or have any other issues with your home improvement using glazed, don't hesitate to contact us at Bridgewater glass for window replacement for professional assistance. Our glaziers have been trained to repair or replace various window frames and handles which makes us a great choice for your double-glazing needs.

Test the new handle

As time passes and through regular use the uPVC locks and handles may be damaged and wear and tear. They can become less secure and effective which is why it's crucial to replace them as quickly as possible. It's also recommended to do this when you upgrade your windows, as changing your handle and lock will help maintain the integrity of the windows you have just bought.

When it comes to uPVC window handles, there are a number of different styles. Some are fixed by pins or screws, whereas others feature blades that fit into the lock mechanism. Each type has its own method of replacement, and it's important to know what type you have before working on it.

The most well-known kind of window replacement companies handle is called the espag. They're usually found on the latest uPVC Windows. The spindle extends from the handle to the lock gearbox and activates the locking mechanism when you open the window. These handles are also easy to remove. However, you should be careful not to harm the mechanism or the handle.

Cockspur window handles are a popular option for uPVC windows. They're secured by a spur that hooks onto an elongated striker plate that is attached to the frame. When you shut or tilt the window, it triggers the locking mechanism. This kind of handle is more difficult to repair than other types however it's an ideal choice for many homes.

Venetian handles are joined to the frame using two bolts, and they have a low projection on the frame. This is different from the Espag handle. These handles are great when you want to have a flush handle which blends in with uPVC window frames. These are perfect for commercial and residential properties.