Repairs to uPVC Windows

upvc window repair windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a number of problems that include sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows so you can reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the size of the window, you can tighten screws to keep them in place.

If you can't reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

UPVC handles can also loosen up. Most often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to close your window and do an initial test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is essential to act if you awake each day to find mouldy walls and wet floors. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the problem the caulking used previously may require removal before a new layer of caulk is applied. It is essential to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal rather than the frame. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with ease it could be hinges at the fault. They can be easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is very easy to replace a hinge on a window however it is simpler if you have someone to help you to hold the frame.

It is also important to verify that the upvc window repair near me hinges are being opened and closed in the correct direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to provide advice.

It is also important to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. The ideal time to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, causing gaps where the sash and frame meet. If they're beyond repair, it could be required to realign them. The second is the interlock, which is located on the hinge of the window and can also become misaligned, again it's feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce the risk of draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder. These are typically fabric tubes filled with some type of filler. They can be put on the top of your windowsill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it is more cost-effective to replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is best to seek professional assistance as soon as possible.