How to Unstick a suzuki jimny replacement key Ignis Key

Suzuki's funky, cheap little city car gets a midlife refresh. It's no hot-hatch but it eats up urban and rural tarmac quickly, and its clever turning circle makes city driving an easy task.

The new model is also packed with clever driver assistance and safety features that includes lane departure warning and a sleepiness alarm, which are both welcome additions to long drives.

Steering Lock

The steering lock is a security measure that protects your Ignis from being stolen when it's in gear. It's a crucial safety feature however it can be a pain when you have to go somewhere, but you're unable to unlock the wheel. There are a few basic things you can do to fix the problem.

The first step is to verify that the ignition switch is in the "on" position. Then, if that's the case, try turning the key in the direction you were turning it before the wheel got locked. This can be a little difficult, but it's typically enough to unlock the wheel.

If the wheel is still unable to unlock, you could spray a small amount of canned air into the ignition cylinder, to lubricate it. Be sure to wear eye protection when doing this so that you don't get any canned air in your eyes! You can also make use of liquid graphite to lubricate your cylinder.

If none of these strategies work, you'll need to replace the ignition lock assembly. It's an easy component to find at any auto parts retailer. Be sure to buy an identical replacement and compare it to your old one before you attempt to install it. Also, make sure to take off the cover that covers the ignition to see and access the assembly.

Worn

The steering lock can cause the ignition switch to get stuck. This is a security feature that is designed to stop your Ignis from spinning away while the engine is running. If this occurs it is possible to unbind the steering wheel by manipulating it.

Over time, your Ignis key will wear out and become harder to turn. It may not happen as often as a damaged switch, but it does happen. If this is the case, you should replace your key.

It is also important to check if there's something that is blocking your Ignis key from getting into the ignition cylinder. Sometimes, there could be dirt or debris that could be wedged inside and keep the key from turning as it should.

You could also try some lubricant and see whether it helps. You can find a variety of lubricants at your garage or local auto parts store.

Another option is to use a silicon "glow in the dark" key cover. These covers absorb light energy and release it when in dark or murky conditions. They also shield your keys from wear and tear. They are available for a majority of suzuki Swift car keys models and are available on the internet or at a local suzuki sx4 key fob programming dealership.

Bent

A key can become bent over time. The teeth of the key may not engage with lock cylinders the same way. This can prevent the key from turning. In this scenario you'll need to replace the key. If you have a spare, it's an ideal idea to get it duplicated and store it in a safe location.

Another reason could be that the ignition cylinder itself may wear out. If the lock pins in the cylinder get stuck or snagged together the cylinder may be unable to allow the key from going all the way into or out of the cylinder. This can be fixed by replacing the cylinder however, it is recommended to replace the cylinder before the key becomes stuck in the ignition.

If the keys of your Ignis remain stuck even after you've tried the most basic solutions It could be time to grease the cylinder. Graphite powder or liquid graphite could aid in moving the lock pins more freely and release your key. This is available in most auto parts stores. When applying the lubricant, make sure that your Ignis remains in park. Do not try to pull it out of its bind it. This could cause more serious problems.

Broken

If you have tried all of the easier ways to make a key remove its stick but it's still unable to move, the last resort is to use a fluid to get it moving. You can buy the lubricant from your local auto parts shop and apply it using the help of a cotton swab or cotton swab to the inside the lock cylinder. Try again. Move the key backwards and forwards gently to spread the fluid. You can try rubbing it forward, but be careful not to press too hard or you could cause damage to the cylinder.

The circuitry inside the key may also become unresponsive due to aging and usage. This isn't nearly as common and usually means you'll have to have the key duplicated in order to get another one.

The case of your Suzuki keyfob can also become damaged or worn. This is especially common when you're using a cheap replica key fob with a rubber or plastic shell. Depending on the situation, The Key Crew can sometimes change the internal circuitry of your old key fob into an alternative shell case, avoiding the need to purchase a new key fob. We'll inform you if this is an option for your particular situation when we call you to set up the service.